Melamin superplasticizer series SM

Product Name

SM

Product Description

SM is a kind of powder form superplasticizer based on sulfonated melamine formaldehyde resin, which is suitable for cementitious mortars with requirements of high fluidity and high strength.

Product Performance

SM can impart mortar quick plasticizing speed, high liquifying effect, low air entraining effect.

SM is of good compatibility with various kind of cement or gypsum binders, other additives such as de-foaming agent, thickener, retarder, expansive agent, accelerator etc.

SM is suitable for tile grout, self-leveling compounds, fair-faced concrete as well as colored floor hardener.

SM can be used as wetting agent for dry mix mortar to obtain good workability.

Recommending

Application

Flowable mortar or slurry for grouting application

Flowable mortar for spreading application

Flowable mortar for brushing application

Flowable mortar for pumping application

Steam curing concrete

Other dry mix mortar or concrete

Usage & Dosage

Dry mixed homogeneously with other ingredients of dry mortar and packaged as one product, which can be at job site mixed with recommended dosage of water for application.

Recommended dosage is 0.3-1.2% based on binder weight. The detailed dosage should be determined by test in advance according to local raw materials and construction regulation.

Packaging

Specification

PE-lined plastic woven bag, 25kg/bag

Storage &

Transportation

Condition

Storage and transportation should be carried out in cool and dry condition. Under high temperature and high humidity, product should be kept away from moisture and pressure to avoid coalescence or agglomeration.

If the product is not used up, the opened package must be sealed tightly to prevent moisture from ingress.

Shelf Life

12 months since production.

For product stored over shelf life, test confirmation should be done before use.

Safety Data

This product is of non-toxicity, non- irritation, non-spontaneous combustion.

This product is approved by REACH. For detailed safety issue, please refer to MSDS.

Typical Product Data

Appearance： whitish powder

Bulk density：400-700kg/m 3

Dry loss after 30min.@ 105℃：≤5%

pH value of 20% solution @20℃：7-9

SO₄² - ion content：3~4%

CI - ion content：≤ 0.05%

Air content of concrete test： ≤ 3%

Water reducing ratio in concrete test ：≥14%