Single Component Liquid Silica Gel

Product Introduction

Single component additive liquid silicone rubber is a kind of liquid silicone rubber that is improved on the original injection type liquid rubber, and components A and B have been mixed evenly during the raw material processing. In addition to ensuring that the raw materials have the same physical and mechanical properties as the original products, it can save the mixing link of A and B, and has the following advantages:

1. It can fundamentally solve the problem of uneven punching of A and B during use; The machine used to need two pressure plates for two-component liquid glue, but now it only needs one;

2. It can fundamentally solve the problems of uneven mixing and heating of static mixer and screw during use; After using this material, it is unnecessary to equip the equipment with static mixer and screw;

3. It can fundamentally solve the problem of dead glue in the barrel during use; The original two-component raw materials have been stored in the barrel for a short time. In the process of use and shutdown, it is often necessary to inject a separate agent B to protect them. In the next use, the raw materials must be discharged, which will not only cause waste, but also lead to the risk of curing the inner glue of the barrel due to incomplete discharge;

4. The cost of injection equipment can be greatly reduced, the investment in equipment can be reduced, and the injection process can also be simplified, which can solve the embarrassing situation of normal production without injection master.

Performance Characteristics

1. Good resilience, long anti yellowing time, and light specific gravity. Compared with inferior products, it has excellent leveling performance

2. High tension, good fluidity, fast forming speed and good demoulding

3. Certified by FDA, LFGB, ROHS, REACH, etc

4. Strong universality and wide application

Application Field

It is applicable to raw kitchen supplies, composite mobile phone cases, sealing rings and miscellaneous products.

Packaging and Storage

20KG plastic coated iron bucket packaging: 6 months (sealed, stored in a cool and dry place; no sun exposure, high temperature baking);

The single component additive liquid silicone rubber shall be stored in an indoor environment below 35 ℃ to prevent exposure to the sun;

Avoid contact with substances containing nitrogen, phosphorus, sulfur and heavy metals during use, otherwise it will cause unripeness;

The temperature shall be controlled above 140 ℃ during molding, otherwise the curing speed will be slow.

Transportation: The product shall be well sealed during transportation to prevent moisture, alkali, acid, rain and other impurities from mixing.